A flat screen mount gives you the flexibility to mount your flat screen TV on a wall out of the way so that you don’t need to use a TV stand. A flat screen mount that has full motion and is articulating gives you many flexible viewing angles so you can customize the view for your room and eliminate glare when necessary.
Any flat screen mount you buy should be capable of accommodating the size and weight of your TV. The mount should also support the VESA pattern of your TV.
The TV wall mount in this article is designed to hold flat panel TVs from 37 to 70 inches and up to 132 lbs. which should accommodate many TV models.
Interested in learning about other popular flat screen TV wall mounts? Be sure to see our other articles about some of the best!
Modern flat panel TVs have built-in screw holes arranged so that they conform to the VESA standard. There are four holes, usually in a square, that are already threaded on the inside to accept VESA standard screws. The flat screen TV bracket you buy may have multiple arrangements of VESA standard holes one of which must match your TV’s. The VESA standard is available online at Wikipedia.org.
Some flat screen TV brackets are full motion brackets with the ability to swivel left or right to provide multiple viewing angles around the room and till up or down to make viewing more comfortable when you need to mount your TV higher on a wall.
The TV mount in this article can swivel a full 150-degrees and tilt up to 5-degrees up or 15-degrees down. Be careful of the swivel numbers. Swivel capability depends on the size of the TV. The smaller the TV, the more it will be able to swivel before contacting the wall. For the full motion TV wall mount in this article, the 150-degree specification is for smaller TVs in its compatible range.
Another factor to consider is ease of installation. Most TV wall brackets require that they be attached to the studs in the wall in order to support the weight of the mount and your TV. In general wall studs are spaced either 16 or 24 inches on center. The wall mount you choose will most likely be setup for 16 inches on center so if your studs are 24 inches on center, you will need to mount a board to the wall first and attach the bracket to the board.
In either case, you should attach the board or the TV to the wall with lag screws that are designed to hold a lot of weight without coming out of the studs. Lag screws cannot be screwed directly into studs, you need to drill a pilot hole big enough to allow the lag screws to be screwed in smoothly, but tightly. A powerful, variable speed drill driver will make the job much easier.
What if you make a mistake and the mount isn’t quite level. Some mounts provide a post-installation leveling adjustment that will level the TV if you have installed the flat screen TV wall mount off from level by a few degrees.
We searched social media, flat panel TV forums, manufacturer sites, customer review sites, retail sites, and consumer sites to find the most popular and highly rated full motion articulating flat screen mount.
Take a look at our choice and see if this full motion mount is the best TV mount for your needs!
If you’re looking for a heavy-duty full motion articulating flat screen mount that can handle a broad range of TV models, the ECHOGEAR EGLF1-BK Full Motion Articulating TV Wall Mount is a popular choice. If features smooth swiveling capability up to 150-degrees, a tilting range from 5-degrees up to 15-degrees down, and extension from the wall up to 16 inches that give you the flexibility to provide optimum viewing angles anywhere in your room. Convenience features include a swivel tension adjustment, post-installation leveling compensation adjustment, and two wall plate openings for cable management. You’re in control with this full motion mount that allows you to adjust your TV for the optimal viewing angle from anyplace in the room.
Flat Screen Mount: Features
- 100% high-grade steel, full motion, articulating, swiveling flat screen mount capable of accommodating flat panel TVs from 37 to 70-inches and weighing up to 132 lbs.
- Mount swivels smoothly up to 150-degrees left and right, tilts from 5-degrees up to 15-degrees down, and extends up to 16 inches from the wall
- Swivel is tension adjustable for smoother or stiffer articulation
- Post-installation TV leveling adjustment compensates up to 3.5-degrees left or right
- VESA-compatible with patterns from 200 x 100 to 600 X 400 in universal increments
- Safety tested and UL certified to hold 4X its load rating of 132 lbs.
- Mounting plate is 17.1W x 10.2H with a mount hole pattern of 16W x 8.9H inches
- Two 5.6W x 7.6H inches cable management openings
- 5-Year limited warranty
- 1 – 6-foot HDMI v1.4 high-speed cable
- 4 – 5/16 x 2.75-inch lag bolts
- 4 – Lag bolt washers
- 4 – M4 x 12mm screws
- 4 – M4 x 35mm screws
- 4 – M6 x 12mm screws
- 4 – M6 x 35mm screws
- 4 – M8 x 16mm screws
- 4 – M8 x 20mm screws
- 4 – M8 x 35mm screws
- 4 – M4/M5 washers
- 4 – M6/M8 washers
- 4 – 22mm (7/8-inch) TV spacers
- Sturdy construction and quality materials
- Easy to install
- Till and swivel operation provides plenty of viewing options
- Excellent value
- Some complaints about included hardware not the right length
- No template to mark drill holes
Flat Screen Mount
Liked this post? Subscribe to my RSS feed and get loads more!
What do you think of this popular TV mount? Which full motion mount are you planning to buy? Please take a moment to leave a comment below.
Please share if you think others will benefit!
The right TV mount can make all the difference in the convenience of watching your flat screen TV. If you think you will need the functionality at a later date or may end up moving your TV, getting a mount that gives you that flexibility is important. We sincerely hope that this article has provided you with valuable information that helps you choose the best flat screen mount for your needs!